Business Type Manufacturer, Exporter, Supplier, Retailer Application Cross Wire Welding And Resistance Welding. Power 50 Kw Voltage(V) 220 V/380 V~420 V Product Details Rated Duty Cycle 50% Welding Type Spot Colour Blue Special Features : Rocker Arm Type Spot Welders are most suitable for mass production due to less operational efforts, Machine confirms to latest Indian and International Standards. These machines are designed and developed to meet the needs of a vast number of metal fabrication shops. Advantages Besides spot welding the machine can also be used for Electrobrazing, Cross wire welding and resistance heating. Salient design features Machine Body is designed for its ruggedness and easy maintenance. A heavy machined bracket is provided on top of the frame for Rockering the upper arm holder. “T” stotted face plate allows both vertical and horizontal adjustment of lower arm. Increased current carrying section because of special electrode holder clamping system. Easy accessibility for maintenance of Electrical, Electronic and Mechanical components. Welding transformer With special design techique adopted to offer, maximum efficiency of the transformer, confirming to latest IS / 4804 part I. It is Air / Water cooled, sandwitch construction of coils having core of high grade electrical steel. Class ' F' vacuum impregnated helps to withstand higher temperature. Electrical & electrical control system: It consists of precision Sterco Solid State C-MOS Integrated Weld Timer having timing range 5 - 99 -199 cycles, adjustable in step of one cycle by means of Thumb Wheel switch alongwith heavy duty Electromagnetic Contactor for switch provided int he mahcine which initiates the weld only after preset pressure is built up. The electrode system Electrode Forced is attained through the rocker arm mechanism coupled with foot pedal. Electrode force can be varried by adjusting the nut provided on the back - rod below the compression spring of rocker arm mechanism. For Fine Control A pair of thyristor can be provided for switching purpose in place of electro magnetic contactor at an extra cost. By using thyristor can be provided for switching purpose in place of electro magnetic contactor at an extra cost. By using thyristor Heat Current can be controlled from 5 to 95% of the current available. Weld time is also adjustable from 1 to 99 cycles in step of one cycle each. Technical Specifications Model SWE ( A) - 5 SWE ( A) -10 SWE ( A ) - 15 SWE ( A ) - 25 SWE ( A ) - 35 SWE ( A ) - 50 SWE ( A ) - 75 Rating KVA at 50% Duty Cycle 5 10 15 25 35 50 75 Throat Clearance Min. mm 100 100 175 175 175 175 175 Max. 200 200 300 300 300 350 350 Max. Available Short Circuit Current at 30 cm Throat Depth K. Amps. 6.5 9.5 10.5 16 19 24 28 Nominal Electrode Force @ 300 mm T.D. Kgf. 75 100 150 200 200 250 250 Rocker Arm Diameter 31.5 38 51 57 57 62 70 Electrode Holder Diameter 15.75 19 22 25.4 25.4 25.4 32 Length of Upper Electrode Holder 200 200 200 200 200 200 200 Length of Lower Electrode 200 200 200 200 200 200 200 Types of Transformer Cooling Air Air Air Air Air Water Water Arms & Electrode Water Water Water Water Water Water Water Overall Dimension Without Throat Depth 30 x 50 x 110 30 x 55 x 1125 33 x 60 x 125 35 x 63 x 130 35 x 63 x 130 40 x 72 x 140 40 x 75 x 140 Note: We reserve the right to change the design and modify specifications at the discretion of our technical department.

Business Type Manufacturer, Exporter, Supplier, Retailer Application Lighting Color Silver, Yellow Power Battery IP Rating IP65 Light Source Bulb, Led Cutting Dept 300 Mm We are a prime Manufacturer, Supplier and Exporter of a huge assortment of Welding and Cutting Torch. Designed to withstand rough conditions in industrial applications, our array of Welding and Cutting Torch can be availed at the most economical prices. This Welding and Cutting Torch is suitable for Welding functions, Mechanical fittings as well as Machine operations. Known for Easy installation Safe operation Trouble free use High durability Gas safety Ideal for Welding functions Mechanical fittings Machine operations

Business Type Manufacturer, Exporter, Supplier, Retailer Application Industrial Use Weight 100-1000kg, 1000-2000kg Input Voltage 110V, 220V Product Details Power 1-5kw, 10-15kw Driven Type Electric Warranty 1year Automation Grade Automatic, Fully Automatic We are offering dc welding inverter. dc welding inverter offered by us is available in arc - 200 amps range. This dc welding inverter is quite easy to operate and seeks minimal maintenance. This chine dc welding inverter runs in cc and cv modes with variable frequencies, amplitudes, and acdc output. We offer these dc welding inverters at very affordable prices. Specifications Input Voltage (V) AC 220 ± 10% Frequency (HZ) 50/60 Rated Input Capacity (KVA) 6.5 No-Load Voltage (V) 65 Output Current Range(A) 10/01/00 Rated Duty Cycle (%) 60 Efficiency (%) 85 Power Factor 0.91 Insulation Class F Electrode Diameter (mm) 1.6-3.2 Weight (kg) 7 Dimensions 135 x 205 x 290 mm

Tejindera Electricals is a renowned manufacturer and supplier of Press Type and Projection Type Welders in India, known for delivering precision, durability, and performance in resistance welding solutions. Our machines are widely used across automotive, fabrication, electrical, and appliance industries for their robust construction and consistent welding quality. Our Welding Machines Include: Press Type Spot Welders – Ideal for sheet metal welding, these machines offer excellent force control and uniform weld strength. Projection Welders – Designed for welding nuts, bolts, and other projections, ensuring strong and reliable weld joints in repetitive applications. Key Features: ✅ Heavy-duty frame for vibration-free operation ✅ Precision Pneumatic / Hydraulic Control ✅ Digital Weld Timer & Control System ✅ High Welding Consistency with low power consumption ✅ Customizable throat depth and electrode configurations At Tejindera Electricals, we combine cutting-edge technology with decades of experience to deliver machines that maximize productivity and minimize downtime. Whether you're looking for single-phase, three-phase, or customized solutions, we provide welders that meet the highest industry standards.

Business Type Manufacturer, Exporter, Supplier, Retailer Type Welding Rectifier Application Electric Furnace, Electronics Use Input Voltage 110V, 220V Product Details Frequency 60Hz Power 1-2kw, 2-4kw Driven Type Electric Phase Double Phase, Single Phase Warranty 1year TERCO D.C. Welding Rectifiers Forced Air Cooled are used as power Source for manual metal Arc Welding (MMAW) jobs with bare & coated electrodes suitable for ferrous and non ferrous metals. These welding rectifiers are also used as an alternative to DC welding generators and even have an edge over DC welding generator as there are no moving parts in welding rectifier except the cooling fan which ensures almost nil maintenance cost, besides its low initial cost as compared to generator. These rectifiers can also be used as power source for plasma Arc cutting gas shielded arc welding & for Tungston Electrode (TIG) welding to do the welding of stainless steel copper alloys. Submerged Arc Welding and also suitable for carbon Air Arc Gouging. TRANSFORMER Specially designed Transformer conforming to IS : 4559 1993 having core of high grade electrical steel Welding current is regulated by latest transconductor type control continuous current variations and 3 phase full waive bridge circuit used in current Rectifier for higher efficiency and steady form, Welding rectifiers are mounted on three solid rubber wheels (Front wheels swivelling & steerable type by means of draw bar) for easy portability, bye bolts had been provided to lift the machine. PROTECTION PROVIDED Both main & control rectifier protected against surges by semi conductor devices for positive protections. M.C.B. is provided for protection of the current controller. On-Off switch is provided on the front panel. OPTIONAL Remote control with required cable length, voltmeter, Amp. meter and a set of welding accessories etc. can also be provided at an extra cost. ADVANTAGES Improves power factor and saves energy. Does not create unbalanced voltage fluctuation on the other load connected Simultaneously. Lower demand of primary current for starting. Very low running and maintenance cost. Extremely low ripples in the output. Technical Specifications Model SDC - 2 SDC - 3 SDC - 4 SDC - 5 SDC - 6 Maximum Welding Current at 60% duty cycle Amps. 200 300 400 500 600 Minimum Welding Current Amps. 40 50 60 80 100 Open Circuit Volts. 75 75 75 80 80 Welding Voltage Volts. 21-28 22-32 23-36 23-40 24-44 Maximum Welding Current at 100% duty cycle Amps. 150 220 300 375 450 KVA as per ISI KVA 5.6 9.6 14.4 20 26.4 Maximum KVA KVA 13 19.5 26 35 49 Cooling Forced Air Cooled Input supply 380/415/440 volts Balance load-3 Phase, 3 lines, 50 Hz. Maximum Electrode Size MM 4 5 6.3 8 8 Minimum Electrode Size MM 2.5 2.5 3.15 4 4 Insulation Class F F F F F F Power Factor with Capacitor 0.8 at half load Recommended Power Factor Capacitor KVAR 4 6 8 10 12 Current Regulator Stepless Rectifiers of higher ratings up to 800 - 1000 amps. with higher O.C.V (Open Circuit Volt) can also be available. Multi - Operator welding rectifiers can also be available. Note: We reserve the right to change the design and modify specifications at the discretion of our technical department.

DC Electroplating Rectifier Manufacturer in India – Tejindera Electricals Tejindera Electricals is a trusted name in the field of industrial power solutions, specializing in the manufacturing of high-quality DC Electroplating Rectifiers. With years of expertise and a strong commitment to innovation and quality, we offer reliable and energy-efficient rectifiers designed to meet the demanding needs of the electroplating industry. Our DC rectifiers are engineered for consistent performance, high efficiency, and long operational life. Whether you're engaged in chrome plating, zinc plating, nickel plating, or any other electrochemical process, Tejindera Electricals provides tailor-made solutions that ensure precise voltage and current control. Why Choose Tejindera Electricals? ✅ Robust Build Quality for industrial durability ✅ Customized Output Ranges as per client requirements ✅ High Energy Efficiency to reduce operational costs ✅ Low Maintenance and easy-to-operate design ✅ Advanced Technology for stable and ripple-free DC supply We serve a wide array of industries including automotive, aerospace, hardware manufacturing, and metal finishing units across India. If you're looking for a dependable DC electroplating rectifier manufacturer, Tejindera Electricals is your one-stop solution. Let us power your plating process with precision and performance.

Business Type Manufacturer, Exporter, Supplier, Retailer Application Cross Wire Welding And Resistance Welding. Power 50 Kw Voltage(V) 220 V/380 V~420 V Product Details Rated Duty Cycle 50% Welding Type Spot Colour Blue Special Features : Rocker Arm Type Spot Welders are most suitable for mass production due to less operational efforts, Machine confirms to latest Indian and International Standards. These machines are designed and developed to meet the needs of a vast number of metal fabrication shops. Advantages Besides spot welding the machine can also be used for Electrobrazing, Cross wire welding and resistance heating. Salient design features Machine Body is designed for its ruggedness and easy maintenance. A heavy machined bracket is provided on top of the frame for Rockering the upper arm holder. “T” stotted face plate allows both vertical and horizontal adjustment of lower arm. Increased current carrying section because of special electrode holder clamping system. Easy accessibility for maintenance of Electrical, Electronic and Mechanical components. Welding transformer With special design techique adopted to offer, maximum efficiency of the transformer, confirming to latest IS / 4804 part I. It is Air / Water cooled, sandwitch construction of coils having core of high grade electrical steel. Class ' F' vacuum impregnated helps to withstand higher temperature. Electrical & electrical control system: It consists of precision Sterco Solid State C-MOS Integrated Weld Timer having timing range 5 - 99 -199 cycles, adjustable in step of one cycle by means of Thumb Wheel switch alongwith heavy duty Electromagnetic Contactor for switch provided int he mahcine which initiates the weld only after preset pressure is built up. The electrode system Electrode Forced is attained through the rocker arm mechanism coupled with foot pedal. Electrode force can be varried by adjusting the nut provided on the back - rod below the compression spring of rocker arm mechanism. For Fine Control A pair of thyristor can be provided for switching purpose in place of electro magnetic contactor at an extra cost. By using thyristor can be provided for switching purpose in place of electro magnetic contactor at an extra cost. By using thyristor Heat Current can be controlled from 5 to 95% of the current available. Weld time is also adjustable from 1 to 99 cycles in step of one cycle each. Technical Specifications Model SWE ( A) - 5 SWE ( A) -10 SWE ( A ) - 15 SWE ( A ) - 25 SWE ( A ) - 35 SWE ( A ) - 50 SWE ( A ) - 75 Rating KVA at 50% Duty Cycle 5 10 15 25 35 50 75 Throat Clearance Min. mm 100 100 175 175 175 175 175 Max. 200 200 300 300 300 350 350 Max. Available Short Circuit Current at 30 cm Throat Depth K. Amps. 6.5 9.5 10.5 16 19 24 28 Nominal Electrode Force @ 300 mm T.D. Kgf. 75 100 150 200 200 250 250 Rocker Arm Diameter 31.5 38 51 57 57 62 70 Electrode Holder Diameter 15.75 19 22 25.4 25.4 25.4 32 Length of Upper Electrode Holder 200 200 200 200 200 200 200 Length of Lower Electrode 200 200 200 200 200 200 200 Types of Transformer Cooling Air Air Air Air Air Water Water Arms & Electrode Water Water Water Water Water Water Water Overall Dimension Without Throat Depth 30 x 50 x 110 30 x 55 x 1125 33 x 60 x 125 35 x 63 x 130 35 x 63 x 130 40 x 72 x 140 40 x 75 x 140 Note: We reserve the right to change the design and modify specifications at the discretion of our technical department.

Business Type Manufacturer, Exporter, Supplier, Retailer Application Welding Weight 130 kg Height 12.6“ Product Details Width 12.4” Length 16.5" Operating Voltage 240 V Power Electric

Business Type Manufacturer, Exporter, Supplier, Retailer Cutting thickness 5-60mm Torch Type Cutting Torch Angle Head 90 Degree Product Details Material Brass Fuel Gas Type Lpg,oxy-acetylene Packaging Type Box we are a prime manufacturer, supplier and exporter of a huge assortment of welding and cutting torch. Designed to withstand rough conditions in industrial applications, our array of welding and cutting torch can be availed at the most economical prices. This welding and cutting torch is suitable for welding functions, mechanical fittings as well as machine operations. known for easy installation safe operation trouble free use high durability gas safety ideal for welding functions mechanical fittings machine operations Technical Specifications Model No. NM - 6 Cutting Capacity 300 mm Thick MS Type of Cutter Injector Type Fuel Gas Acetylene or lpg with suitable nozzle Length 450 mm (longer lengths available order Angle Head 90o or 180o